How to Set Up and Hang Your Solar Lantern Bird Feeder
How to Set Up and Hang Your Solar Lantern Bird Feeder
Setting up a new solar bird feeder is simple when following the correct steps. Consult the main guide for broader placement and maintenance recommendations.
Step 1: Unpack the Feeder
Remove the Solar Lantern Feeder from its packaging. Thanks to the thoughtful design, there is no assembly required out of the box. Inspect the durable bronze materials and verify that the glass panels and lower tray are clean and intact.
Step 2: Activate the Solar Panel
!Step 2: Activate the Solar Panel
Locate the power switch on the solar panel module near the top of the lantern. Turn on the switch to the "ON" position. This allows the internal charge controller to absorb daylight and power the solar powered LED light after sunset. Leave the switch in the "ON" position permanently for automatic daily operation.
Step 3: Select an Optimal Location
Choose an outdoor spot that receives uninterrupted sunlight for at least 6-8 hours hours daily. Suitable locations include open tree branches, garden shepherd hooks, or patio overhangs. Ensure the spot stays approximately 5-6 feet feet off the ground to deter climbing pests.
Step 4: Fill the Seed Tray
Pour wild bird seed onto the circular feeding tray. You can add up to 32 oz oz of seed mix. The bottom features built-in drainage holes in tray sections so any moisture drains out automatically, keeping seed dry.
Step 5: Hang and Position the Feeder
Hang the fixture securely using its top bracket onto your chosen hook or branch. Position the feeder so the top solar panel faces upward toward the open sky. During the day, solar panels absorb light and charge the internal battery. At night, the unit automatically activates, providing 8-10 hours of illumination at night.
Read the full guide: The Ultimate Guide to Choosing the Best Solar Lantern Bird Feeder